Every morning when Zhong Taojun comes to work at the company, he will see the cleaner cleaning the floor, so the tiles on the floor will sparkle every time he goes to work. Therefore, you should know what Zhongtao Jun is going to share with you today. What’s the content? That’s right, that’s the method of Cleaning ceramic tiles. How to keep ceramic tiles still shiny is probably what most people want to know, so let’s follow Zhongtaojun to find out!
1. Daily cleaning tips for ceramic tiles
1. For daily cleaning of ceramic tiles, you can use detergent, soap, etc.
2. Use soap and a little mixture of ammonia and turpentine to clean the tiles to make them more shiny.
3. If there are scratches on the brick surface, you can apply toothpaste on the scratched area and wipe it with a dry cloth to repair it.
4. Use decontamination paste to remove dirt from time to time in the gaps between bricks, and then apply a layer of waterproofing agent on the gaps to prevent mold growth.
5. Use sodium hydroxide or potassium bicarbonate solution to remove contaminants such as tea, coffee, beer, ice cream, and grease.
6. For ink, cement and other pollutants, use dilute solutions such as hydrochloric acid and nitric acid.
7. Use special cleaning agents for paints, coatings and other pollutants.
8. Rust can be ground into powder with 3-4 vitamin C tablets, sprinkled on the surface of the floor tiles, and then washed with water several times.
9. All kinds of glue can be removed with banana water. Pure banana water is a colorless, transparent and volatile liquid, flammable, and is mainly used as a solvent and diluent for spray paint.
Note: High-quality ceramic tiles can be cleaned with cloth and water. Use as little or no other chemical agents as possible.
2. Daily protection methods for ceramic tiles
1. Anti-cracking
In daily use, avoid using metal sharp objects, glass ceramics, nails and other hard objects to knock or rub the ground. Do not drag heavy objects back and forth on the ground to avoid scratching the glaze and affecting the appearance.
2. Anti-scratch
If there are slight scratches, apply toothpaste around the scratches, wipe repeatedly with a soft, clean dry cloth, then apply a small amount of floor wax, and polish with a clean cloth after drying to achieve a bright as new effect. If the damage is serious, it should be replaced in time or asked to be repaired by professionals.
3. Moisture-proof
It is best to open doors and windows immediately after cleaning to allow air circulation and dry the moisture on the tile walls. In humid weather in summer, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.
4. Anti-stain
For general stains, you can use a soft dry rag to deal with them. If you encounter stains that must be cleaned with water,For stains, it is recommended to use a rag that is soaked and wrung out until it does not drip.
5. Anti-mold
The gaps between the tiles can be cleaned with decontamination paste from time to time, and then a layer of waterproofing agent can be applied to the gaps with a brush to prevent mold growth.
3. Things to note after laying ceramic tiles
1. After paving for 1 hour, remember to wipe away the cement, caulking agent or other sticky objects left on the brick surface in time, because it is difficult to clean the caulking agent after it has been attached for four hours. .
2. After 12 hours of paving, the brick surface should be knocked for inspection. If there is any hollow sound, it should be re-paved.
3. After 24 hours of paving, you can walk on it, scrub it thoroughly, and mix detergent with water to thoroughly clean the tiles.
4. When drying the tiles, not only moisture is required, but more importantly, the moisture must be locked to ensure that the moisture is not lost. After laying the tiles, it is best to sprinkle some water on the laid tiles every day, but avoid splashing water. Keep the ground moist, ideally for 4-6 days.
4. What are the key areas that require maintenance of ceramic tiles
1. Bathroom
①Clean soap scum
For the accumulation of soap scum on the bathroom wall, you can first rinse it with warm water to partially dissolve the soap scum, and then use a brush to gently wipe it off. In addition, you can also use sulfuric acid or hydrochloric acid solution, drop it on the brick surface, let it sit for a few minutes and then wipe it.
② Defense against soap scum
Stains left by soap can be avoided. After daily bathing, wipe the soap scum on the wall in time; in addition, you can apply a layer of antifouling agent to the tiles in the corners of the bathroom. Can effectively avoid soap scum.
2. Behind the faucet
①Clean rust
A layer of rust is prone to appear on the tile walls behind water pipes and faucets in your home. It can be removed by washing with 2% oxalic acid solution, and then wiped clean with clean water. You can also grind 3-4 vitamin C tablets into powder, sprinkle them on the surface of the tiles, and then scrub them with water several times to remove rust stains.
② Defense against rust
For tiles behind water pipes that are prone to rust, you can use anti-rust agents or professional rust removers to prevent rust and remove rust stains;The stained tiles should be partially polished, laminated, coated with grease, anti-rust oil and other methods to prevent rust.
The above content is what Zhongtaojun has shared with you about ceramic tile maintenance methods! In fact, the most practical way is to insist on cleaning every day. If you can't clean every day, you should at least clean every three to five! Right! In order to keep the tiles as bright and clean as new, daily cleaning is indispensable. Therefore, don’t be lazy. Well, the above is what Zhongtaojun shared with you. Zhongtaojun will go ahead. La!
